DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt Drill Review: High Power Drill

DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt Drill Review

We can all agree that purchasing a quality power tool is essential for DIY projects. Similar to many other power tools that you can find on the market, DeWalt DCD9508 hammer drill is built to last and quite durable. It is specifically designed to give you the possibility to work for extended amount of time and heavy-duty performance. That’s why, we decided to present you a thorough guide and review of DeWalt DCD9508 cordless drill.

 

 

Product Overview


Product: DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt Drill

Cheapest Place to Buy: Amazon.com

Unique Feature: Better Control; Superior Performance

My Rating: 9.6 out of 10

 

Specifications


  • Size – When it comes to size, the assembled depth is 10-inches, assembled height is 7.75-inches and assembled width is 2.25-inches. That makes it portable and convenient to use for a prolonged time.
  • Battery Type – It works on 18V Lithium-ion battery that you can charge for more than 2000 times before change. It comes with fast charging property so you don’t have to wait too long. You can quickly recharge it for one hour.
  • Chuck Size – Chuck size is 1/2-inches.
  • RPM – It can reach up to 2000 RPM which makes it high-end tool perfect for heavy-duty projects.
  • Warranty – You will get three years limited warranty and free service during the first year.

DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt Drill Review

 

Performance


It contains an engine that can efficiently deliver an amazing 450 UWO, and you can choose triple speeds with a slight hammer action. The highest RPM can reach up to 34,000 BPM, which is impressive when compared with other tools within the same price range.

Finally, you will be able to drill and drive through anything you can imagine such as wood, steel, plastic, concrete, composites and even stone.

It comes with 1/2-inches drill bit that can quickly go deep up to 8-inches of wood without any additional problem.

The chuck is lightweight, and you will be able to tighten and loosen it in a matter of seconds. It comes with excellent tightening mechanism which is convenient when compared with other tools on the market.

Throughout the operation, the chuck will self-tighten so that you can finish your job more efficiently. It doesn’t matter if you are using hex-eyed or round bits. It will hold them tight so that they can’t interfere with your work.

At the same time, you can easily choose 22 different clutch settings.

DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt Drill Review

The main strength of this particular drill is the possibility to choose triple speed range:

  • Low – Between 0 and 500 RPM
  • Medium – Between 0 and 1250 RPM
  • High – Between 0 and 2000 RPM

You can also select triple speed range for hammer action:

  • Low – Between 0 and 8500 BPM
  • Medium – Between 0 and 21250 BPM
  • High – Between 0 and 34000

The best thing about it is that you will be able to choose between this six combination to finish whatever you are working on without any additional problem.

If you want to upgrade your regular drill with a new one that will provide an immersive amount of performance, you should choose this particular tool.

It works on Lithium-ion batteries, which will guarantee a prolonged life and much better performance.

According to DeWalt, the battery will stay the same for at least 2000 charges. This is way better than NiCad batteries that power tools use until a few years ago.

DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt Drill Review

 

Pricing


The overall price of Dewalt DCD950B Hammerdrill is less than $140 which is affordable when you have in mind all its features and capabilities.

On the other hand, you will get a three-year warranty, and one-year free service contact so that you can have it longer than expected. At the same time, there is a 90-day money back guarantee in case that you don’t get what you expect.

 

Helpful Tips


It is important to take care of your power tool in order to keep it for a longer period of time. So here are some helpful tips that you can follow

PROTECTION

You should always wear a dust mask and eye protection because materials can easily chip, and it will be difficult to breathe.

CHECK FOR BITS

There are numerous bits that you can choose with this particular tool. However, after a long work, you should check and inspect it before you start the next project. In case of any deterioration, you should use another one, because it can damage what you began to work

INSPECT SURROUNDINGS

Before you start drilling, research and investigate what is going on around the working area. In that way you will be able to check whether there are cables, pipes, wires and another thing that you may puncture while working.

DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt Drill Review

 

Bottom Line


We have presented you a thorough guide on DeWalt DCD950B hammer drill that you may purchase on the market. Of course, there are different things that you should have in mind before you choose any power tool.

Finally, power tools are an investment that should be worthwhile. Therefore, you should be thorough in researching about it.

Pros

  • It can quickly drive and drill through all building materials such as steel, plastic, wood, composite and even stone and concrete
  • Powerful motor that will stand the test of time
  • Great run time
  • Simple to assemble
  • Threes speed rotation and three-speed hammering

Cons:

  • It is not lightweight as other tools within the same price range on the market

 

Product Summary


Product: DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt Drill

Cheapest Place to Buy: Amazon.com

Unique Feature: Better Control; Superior Performance

My Rating: 9.6 out of 10

 

Click here if you want to learn more about DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt Drill.

If you have more questions and concerns about this power tool, feel free to comment it below.

Best Regards,

John Rico

 


Leave a Reply

Your email address will not be published. Required fields are marked *